Notes: 1 Please apply removable low to medium strength screw lock for installation 2 We recommend using a thread-locking agent on all bolt threads. 3 Please check the slider wear periodically In the case of trail models, guiding performance is enhanced as much as racers. The abrasion speed varies depending on the number (maximum number of 45) 4 The range of change of the number of the rear sprocket eth is less than that of the stock chain guide. When the number of teeth is increased, the position of the chain adjuster may move forward, causing interference. 5 Since the guide performance is improved as much as the racer, the range of change of the number of rear sprocket teth is less than the stock. If the position of the chain adjuster is large and forward when the number of chains increases. Maximum eth CRF250L/M. CRF250RALLY:45, WR250R/X:48,KLX230:48
Disclaimer: Nicecnc Store parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson, KTM, Duke, Aprilia， Triumph， Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, Polaris, Can-am, Arctic Cat, Ski-Doo, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, etc.