This injector relocation block is for moving the injector from the cylinder to in front of throttle body. Compatible with 2018+ KTM, Husqvarna 250/300 and 2021+ Gas Gas 250/300 fuel injected models. After installation, huger and smoother power will be delivered at low/medium RPM.
The 2018+ KTM/HQV 250/300 TPI/i models and `21+ Gas Gas EC250/300/EX300 models are lean in power delivery from the factory to comply with European emissions laws. The downside of the design is that your bike tends to have malfunctions like hard starting, erratic idle, jerky low rpm throttle response (huck-a-buck), pipe bang, bogging. If you get some aftermarket parts like high compression head, air box mod, your bike may become even leaner and experience engine damage if not corrected.
The product does not include the reed block or injectors. Comes with a throttle plate and adjusting screw for you to replace the stock set screw.
After relocating the injector before the reed cage, the fuel, oil and air mix together before entering the engine. Just like all carburated bikes before. In that way, the crank and top end will be lubricated before starting the bike. Power increases from idle to wide open. Compatible with stock or aftermarket ( GET ) ecus.
For GasGas EC 250 2021-2023 EC 300 2021-2023 EX 300 2021-2023 EX 250 2022-2023
Disclaimer: nine-cnc store parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, KTM, Duke, Husaberg, Husqvarna, BMW, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, Beta, GASGAS, Sherco etc.