High Flow Air Filter KTM 690 Enduro R 2009-2023 Husqvarna 701 Enduro 16-23 GAS GAS ES700 2023
Color:Only Air Filter
Quantity:
Rev up your KTM and let it breathe easy with the high-performance Air Filter. Unlike OEM filters, our filter maximizes airflow surface area, delivering your KTM peak horsepower for any track day adventure.
Features:
Features:
- Long-lasting Power - Air filters are durable and provide a better investment for your vehicle. They can last throughout the vehicle's entire lifespan.
- Improved Performance - Properly maintained air filters can enhance performance and fuel efficiency.
- Reusable Filters - You don't need to purchase new filters every time. Just clean and re-oil them, and your engine will remain in good condition. This saves you money on buying new filters.
- Better Filtration/Airflow - Air filters use cotton/oil to provide better filtration and airflow.Regular cleaning and re-oiling not only improve performance but also ensure better filtration for the engine.
- Fuel Economy - Improved airflow leads to better fuel economy. More airflow into the engine reduces fuel consumption, saving you money at the pump.
- Power Boost - Increases vehicle horsepower by 1-4%. The filter adds overall horsepower and torque, although the smaller percentage may not be easily noticeable.
- Washable - Easy to maintain. With a filter oil kit and cleaning products, you can easily clean and re-oil the filter, making it cost-effective.
- Extended Engine Life - Air filters have larger pores or gaps between filtration fibers, allowing more air to pass through and cool the engine, thereby extending its lifespan.
- Innovative Design - Utilizes an oil cotton media layered design, providing more airflow compared to traditional paper filters.
- Easy Installation - Air filters are designed to fit easily into the factory airbox, and with the right tools, installation is a breeze.
Package Included:
1 x High flow air filter
Fitment:
- For Air Filter:
KTM 690 Enduro 2008-2009
KTM 690 Enduro R 2009-2023
KTM 690 SMC 2007-2011
KTM 690 SMC R 2012-2023
Husqvarna 701 Enduro 2016-2023
Husqvarna 701 Supermoto 2016-2023
GAS GAS ES700 2023
GAS GAS SM700 2023
- For Air Box Top Cover:
For KTM 690 Enduro R/SMC/SMCR/RALLY 2008-2023
For Husqvarna 701 ENDURO/ Supermoto 2016-2023
For GasGas 700 SM/ES 2022-2023
Routine maintenance Instructions:
- 1. After removing the filter element, use a soft brush or cleaning product to clean the dust attached to the filter.
- 2. Spray the cleaning agent evenly on the surface and wait for 5-8 minutes.
- 3. Rinse the filter with low-pressure water from the clean side to the dirty side to remove dust and dirt.
- 4. After rinsing, gently shake off the water from the filter or let it air dry naturally.
- 5. Do not use an air gun or hairdryer to dry. Using such methods may damage the original material of the filter.
- 6. Squeeze-on oiling (use K&N 99-5050): After air drying, apply a thin layer of K&N red oil on the clean filter element (apply to about 30% of the total area, the oil will gradually penetrate the entire area without dripping). The application of the oil should be light, thin, and even for maximum effectiveness.
- 7. Reinstall the cleaned and oiled filter element, making sure the screws are securely fastened during installation.
Note: It is recommended to clean the filter every 5,000 kilometers to ensure smooth engine breathing and no delay in horsepower output!
Disclaimer:
Nicecnc parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson, Honda, Yamaha, Kawasaki, Suzuki, KTM, Duke, Husaberg, Husqvarna, BMW, Aprilia, Triumph, Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian, etc.