Hi, Would like that you made something similar to this but at a reasonable cost! This one is outragously expensive: Steering Damper with Mounting Bracket for KTM 390 Adventure R/Enduro R/SMC R 25...

I notice that these comments are rather old.... has this been improved on already?  

NiceCNC airbox for CP2 Yamahas is fine for street but not usable for offroad.So I was thinking, maybe NiceCNC can develop a new airbox, something similar like GYTR airbox for tenere 700 so we can u...

I like the idea behind this product, and those suggestions seem very practical. A more secure O-ring would definitely make installation less frustrating, especially if it tends to fall out. I also ...

This company has got me for over $600 on derby covers without gaskets, clutch plates and springs that don't function.  Catch cans that need modifications. I tried to return my last order after...

Solid setup you've got there — master cylinder covers, shift linkage, rotor hardware, the whole package. Glad to hear the quality's holding up, especially on the critical stuff like brake and...

I'm so tired of companies being to lazy to provide any installation instructions. It's so simply to provide a short video showing the product being installed. Not that hard to provide a bit of cust...

Black Anodise pushrod covers on Harley Davidson touring after 2000kms

Parts used on my Honda TRX450R 2008. Air Box Lid, and extended size rear brake pedal . Both work Great! I heve '91 Honda TRX250X, '24 Honda TRX250X,'08 Honda TRX400EX, '14 Honda TRX400X, and '08...

Hi, I'd like to see a rally tower for the DR650 similar to the ARX ones.  

The pushrod covers for the touring bikes will need a washer between the spring and o-ring!!! Stock pushrod tube hide the o-ring under the lower tubes shoulder. The NiceCNC tubes look and feel great...

doe nice have a contact to communicate with customer service?

I'm looking for a gear shift lever and levers for AJP enduro 

I just got the same one for my 2024 T7 and it is not made to fit mine aswell The dash is worng and the plug on the wirining is 6 pin my bike has a 4 pin. Fighting with NiceCNC to refund me.  ...

Not happy with the rally tower and lights supposed to be plug and play. Fitted it and have lost the extra power point, no way of fitting the Aluminium crash bars or the Nice CNC steady bracket.And ...

Tenere 700 heavily modified and a regular euro traveller. 

Hola a todos....  De la lectura e investigación realizada en los foros sobre las nuevas KTM 390 ADVENTURE / ENDURO del año 2025 y 2026, he logrado verificar que una gran cantida...

Excellent parts, nice upgrade from stock parts

I am searching for a mount GPS / Navigatie for a MT07 2025 Suitable for bar clamp center line spec is 80 mm wide and lengte 40 mm heart to hart distance.  Can you make this for a MT07 2025&n...

KTM kickstands are traditionally weak, I am wondering if Nice CNC are planning on making an adjustable stand to suit the 890 with an offroad spec foot.