Tesla 2PC Wheel Spacers Kit 20mm Hubcentric ^Sale

• High-Strength Aircraft Aluminum Alloy 6061-T6, Forged Material. Insist on the conception of putting safety in the first place and reject to use the casting material.
• Hard Anodized for durability and corrosion protection.Studs/Lug nuts: surface treatment is from chroming to dacromet, becoming more anti-rust.
• Precision Engineered Hub-Centric and Model Specific for Perfect Fit and Wheel Balance.
• Remove gad by spacing wheel and tire out to fit with fender after handing.
• Increase the car wheel track, reduce the body center of gravity, reducing the body deformation.To improve vehicle stability and improve handing and other functions.

Specifications:

• Brand: NICECNC
• Condition: 100% brand new Aftermarket Spare Parts
• Type: Wheel Spacers
• Machining Precision :CNC Machined
• Material: 6061-T6 Aluminum
• Surface Finish: Anodized Black
• Wheel Bolt Pattern: 5x114.3MM / 5x4.5"
• Spacer Thickness: 2x 20MM
• Hub Center Bore: 64.1 MM
• Stud/Nut Thread Pitch: M14x1.5/14mmx1.5/14-1.5
• Stud Grade:10.9 Grade Tested
• Torque Specs:100-110 ft/lb
• Minimum turns for Lugs: 7.5 Turns

Package Included:
2x 20mm Wheel Spacers
10x Lug Bolts

Fitment:
Replacement for Tesla Model 3 2017-2021(Only Suitable For Original Brake Discs!!)
Replacement for Tesla model Y 2020-2021 (Performance version not supported)

Installation Tips:
1. Professional installation is highly recommended.
2.Make sure you get 5-7 turns before tightening.And must be torqued down to Factory Specs.
3.The back of the spacer must sit flush against the vehicles hub.No gap in between the adapter and hub.
4.We have determined the lug bolt you need for the installation.Full Set of Lug bolts are included in the package to mount the spacers.
5.Re-torque all lug nuts after 25-50 miles of driving, then again 2-3,000 miles.
6.Avoid an impact wrench; improper usage may cause damage to components.

Note:
1.No returns or exchanges once they have been installed.
2.Please make sure you take the proper measurements before purchasing.
3.Vehicle fitment compatibility is only a guide, please ensure that these are the correct ones for your vehicle.
4.If you are not sure, you can always email us and we will be more than happy to help.

Disclaimer: Nicecnc Store parts are not sponsored or endorsed by, or affiliated with the brands its parts fit, including Harley-Davidson，KTM, Duke，Aprilia，Triumph，Husqvarna, Honda, Yamaha, Kawasaki, Suzuki, Beta, GASGAS, Sherco, Polaris, Can-am, Arctic Cat, Ski-Doo，Piaggio, Ducati, MV Agusta, Moto Guzzi, Benelli, Buell, CF-Moto, Enfield, Hyosung, Indian,etc.